Belt Ordering St. Louis Factory Supply, Inc.
Fill out completely, then click FILE and PRINT. This will print out the form for faxing into
St. Louis Factory Supply Inc.

Please fill out completely. Information on this form will help, in filling your order.
Name:
E-Mail:
Street Address:
Address 2:
City: State: Zip:
Phone:        FAX number:        Date:
Conveyor ID:
Representative:
1. Width
2. Length Ft. In.
3. # Plys
4. Color
5. Carcass
6. Compound
Centers
7. splice type:
Open length
Metal Lace -Type of lace
Vulcanized endless
Prepared LAPS
Other
8. surface Top: Bottom
Describe
additional information:
9. Gauge
10. Brand name
11. Cleated Height:
Width
Centers
No holes
In. bolt hole center
In. Cup spacing
In. Dia holes
Single row
Double Row
Fastner type
12. Vee Guide
0
A
B
C
D
MOLDED
RUBBER
OR
PVC		 CLEAT                   REC
HEIGHT            PULLY DIA.		 URETHANE CLEAT                   REC
HEIGHT            PULLY DIA.
1/2".............................3" 1/2".............................6"
1"................................4" 1"................................6"
1-1/2"..........................5" 1-1/2"..........................8"
2"................................6" 2"................................10"
2-1/2"..........................8" 2-1/2"..........................12"
3"................................10" 3"................................14"
LUG                     REC MIN
CLEATS            PULLY DIA.		 LUG                     REC MIN
CLEATS            PULLY DIA.
A................................3" A................................N/A
B................................3-1/2" B................................N/A
C................................4" C................................N/A
D................................8" D................................N/A
VEE          SOLID       NOTCHED
GUIDES		 VEE                     NOTCHED
GUIDES
A..................4"..................8" A................................4-1/2"
B..................6"..................8" B................................6"
C..................8"..................8" C................................8"
D..................12"................8" D................................10"
LUG                     REC MIN
CLEATS            PULLY DIA.		 SIPED ONLY SIPED AND DRILLED
A-B-C-D..same as Vee Guides
3/4"............................10" .........7"......... ..............6"
1"...............................10" .........7"......... ..............6"
1-1/2".........................18" .........14"......... ..............12"
2"...............................18" .........14"......... ..............12"

CAUTION---Each belt specification has a manufacturer's recommended minimum pully diameter, which is shown for each specification in this catalog. These manufacturer's minimums override any of the figures above. i.e. the larger if the two prevails.
Revised: 08 Oct 98
Copyright © 1997 St. Louis Factory Supply Inc.
bobstlfs@juno.com
[Toll Free] 1-866-234-2358
[Phone] (314) 842-6969
[FAX] (314) 842-1526

[Home]