PLATEGRIP - FOR HIGH TENSILE AND PVC BELTING

Duragard: DURAGARD is a special heat-treated steel with abra-
sion-resistant characteristics that provide several times the life of stan-
dard steel. Duragard Plategrip fasteners are not recommended for use
in highly corrosive environments, but are instead specially formulated
for abrasive situations.

Duragard fasteners are heat-treated to a file hard surface to provide
longer service life through improved abrasion resistance. Like stain-
less steel, Duragard fasteners are available in complete Duragard sets
or with top plates of Duragard and the balance of the fastener made of
standard steel.

PLATEGRIP DURAGARD
25 SETS DURAGARD TOP PLATES BALANCE STEEL	100 SETS DURAGARD TOP PLATES BALANCE STEEL BOTTOM PLATE PREASSEMBLED
NUMBER	NUMBER
1EDT	1CDT
140EDT	140CDT
190EDT	190CDT
1 1/4EDT	1 1/4CDT
1 1/2EDT	1 1/2CDT
2EDT	2CDT
2 1/2DT*	2 1/2CDT
3DT*	3CDT

PLATEGRIP DURAGARD
25 SETS DURAGARD TOP & BOTTOM PLATES	100 SETS DURAGARD TOP & BOTTOM PLATES BOTTOM PLATE PREASSEMBLED
NUMBER	NUMBER
1ED	1CD
140ED	140CD
190ED	190CD
1 1/4ED	1 1/4CD
1 1/2ED	1 1/2CD
2ED	2CD
2 1/2D*	2 1/2CD
3D*	3CD

Repair Plates: Repair Plates are used to prolong life of belts
which have been torn, require patching of worn spots, or have
"soft spots". Repair plates should be
used only across the belt, and never
applied so they travel lengthwise over
the pulley.

RP-1 for belts 1/4" to 1/2" in thickness.
RP-2 for belts 3/8" to 13/16" in thickness.

PLATEGRIP SHIPPING WEIGHT CHART
SIZE	10 SETS	20 SETS	100 SETS
1	-	2.8	11.0
140	-	4.0	16.0
190	-	4.9	19.6
1 1/4	-	4.8	19.5
1 1/2	-	5.5	22.0
2	-	7.5	30.0
2 1/2	6.4	-	64.0
3	7.0	-	70.0
RP1	-	4.5	18.0
RP2	-	9.8	39.0

Extra Parts are available for the following
sizes: 1, 140, 190, 1 1/4, 1 1/2, 2, 2 1/2, 3,
RP1, and RP2. Extra parts packages are
available for steel nuts and bolts, and stain-
less nuts and bolts. 100 pieces per pack.